• Do not add any more water once the setting process has already begun.

• Do not add any other binders (lime, gypsum, cement) or other fillers or factory-mixed dry mortars.

• Do not use Ultraplan Basic Xtra outdoors or in wet rooms.

• Ultraplan Basic Xtra should not be used on substrates with a risk of rising damp or excessive moisture.

  Use residual moisture.

• In multi-layered constructions, this can only be done after the first layer has dried and a previous layer has been applied.

  Apply an intermediate primer.

• Do not use Ultraplan Basic Xtra on wooden floorboards, metal, rubber, PVC or linoleum.

• Do not use Ultraplan Basic Xtra at temperatures below +5°C.

• A minimum layer thickness of 3 mm is required under multi-layer parquet flooring.

• Apply Ultraplan Basic Xtra to new mastic asphalt screeds in layer thicknesses up to a maximum of 5 mm.

• Ultraplan Basic Xtra should not be used for subsequent installation of rubber floor coverings or parquet with shear-resistant underlayment.

  Use adhesives.

• Ultraplan Basic Xtra is not suitable for areas with expected high point and dynamic loads, such as corridors and rooms in

  Use in hospitals, nursing homes, production halls, etc.

• Ultraplan Basic Xtra on moisture-sensitive or insufficiently load-bearing substrates

  Use (e.g., calcium sulfate screeds, adhesive residues, etc.). In these cases, a reactive resin primer must always be used.

Ultraplan Basic Xtra is a grey, factory-mixed dry mortar consisting of fast-hydrating special cements,

selected sands of denser grain size, resins and special binder combinations, which are used in the MAPEI

was developed in research laboratories.

When mixed with water, Ultraplan Basic Xtra produces a very pourable and easy-to-use, self-leveling product.

Fast-setting filler with good adhesion to the substrate.

Ultraplan Basic Xtra can be processed mechanically using standard mortar pumps and spread over distances of 100 m.

be promoted.

Ultraplan Basic Xtra can be applied in layer thicknesses up to 10 mm without cracking and achieves a [result] after complete curing.

Good flexural, compressive and abrasion resistance.

Once the substrate has reached the required moisture content, the top layer can be laid. Drying and curing times depend on...

the thickness of the filler layer, the surrounding climatic conditions and the absorbency of the

subsurface

• Leveling of concrete surfaces and cement screeds or screeds made from Topcem , Mapecem , Mapecem

  Pronto or Topcem Pronto .

• Leveling calcium sulfate screeds.

• Leveling of heated screed constructions.

• Leveling of existing concrete substrates, terrazzo, ceramic and natural stone coverings.

• Also suitable for leveling cast asphalt screeds, firmly bonded chipboard, magnesia and

  Stone wood screeds etc.